DC60 (14/08/40) วัตถุประสงค์ของการประดิษฐ์นี้คือถังมีฝาปิดพร้อมด้วยฝาปิดถังและแหวนหนีบจับปิดคลุม ฝาปิดถัง ได้รับการจัดเตรียมให้มีร่องวงกลมตามเส้นรอบรูปที่แผ่นฝาปิดแบนของมันและขอบด้านนอกของมัน ในขณะที่ยังประกอบด้วยแอ่งถังอย่างน้อยหนึ่งแห่งที่ส่วนรอบนอกของมันซึ่งมีหรือไม่มีรูถัง เมื่อถังถูก ปล่อยให้ตกลงนั้น พื้นที่โดยรอบแอ่งถังก็จะแตกได้ง่าย นั่นคือ ฝาปิดถังนั้นมักจะหลุดจากแหวนหนีบจับ โดยมีการรั่วไหลเป็นผลตามมา เพื่อปรับปรุงความคงทนต่อการรั่วไหลของฝาที่มีถังปิด โดยเฉพาะอย่างยิ่งถังที่เหมาะสมและ อนุญาตให้ใช้กับของเหลวอันตรายได้ ในสภาพที่มีโหลดความเค้นสูงมากนั้น พื้นที่โดยรอบของแอ่งถัง ของฝาปิดถังก็จะต้องได้รับการผ่อนคลายความเค้นในกรณีที่มีความสูงเกิน (ถังที่ถูกปล่อยให้ตกลง) การที่เป็นเช่นนี้จะได้รับการทำให้บรรลุผลโดยการทำและการประกอบรวมไว้ระหว่างแอ่งถังเว้าเข้า (34, 44) และขอบด้านบนของขอบรูปตัวยูคว่ำด้านนอก (20) ของฝาปิดถัง (14) ที่มีการจัดเตรียม ที่เหมาะสมโดยที่ส่วนที่ยื่นออกเชิงเส้นทางรัศมี เมื่อวัดจากจุดกึ่งกลางของฝาปิดไปยังขอบด้านบนของ ขอบรูปตัวยู (20) ของพื้นที่หรือส่วนนี้ของฝาปิดถังซึ่งยาวเมื่อสัมพันธ์กับพื้นที่หรือส่วนใกล้เคียงของ ฝาปิดถังที่ห่างจากแอ่งถัง (34, 44) วัตถุประสงค์ของการประดิษฐ์นี้คือถังมีฝาปิดพร้อมด้วยฝาปิดถังและแหวนหนีบจับปิดคลุม ฝาปิด ถังได้รับการจัดเตรียมให้มีร่องวงกลมตามเส้นรอบรูป ที่แผ่นฝาปิดแบนของมันและขอบด้านนอกของมัน ในขณะที่ยังประกอบด้วยแอ่งถังอย่างน้อยหนึ่งแห่ง ที่ส่วนรอบนอกของมันซึ่งมีหรือไม่มีรูถัง เมื่อถังถูก ปล่อยให้ตกลงนั้น พื้นที่โดยรอบแอ่งถังก็จะแตกได้ ง่าย นั่นคือ ฝาปิดถังนั้นมักจะหลุดจากแหวนหนีบ จับโดยมีการรั่วไหลเป็นผลตามมา เพื่อปรับปรุงความคงทนต่อการรั่วไหลของ ฝาที่มีถังปิด โดยเฉพาะอย่างยิ่งถังที่เหมาะสมและ อนุญาตให้ใช้กับของเหลวอันตรายได้ ในสภาพที่มี โหลดความเค้นสูงมากขึ้น พื้นที่โดยรอบของแอ่งถัง ของฝาปิดถังก็จะต้องได้รับการผ่อนคลายความเค้น ในกรณีที่มีความสูงเกิน (ถังที่ถูกปล่อยให้ตกลง) การที่เป็นเช่นนี้จะได้รับการทำให้บรรลุผลโดยการ ทำและการประกอบรวมไว้ระหว่างแอ่งถังเว้าเข้า (34, 44) และขอบด้านบนของขอบรูปตัวยูคว่ำด้าน นอก (20) ของฝาปิดถัง (14) ที่มีการจัดเตรียมที่ เหมาะสมโดยที่ส่วนที่ยื่นออกเชิงเส้นทางรัศมี เมื่อ วัดจากจุดกึ่งกลางของฝาปิดไปยังขอบด้านบนของ ขอบรูปตัวยู (20) ของพื้นที่หรือส่วนนี้ของฝาปิด ถังซึ่งยาวเมื่อสัมพันธ์กับพื้นที่หรือส่วนใกล้เคียง ของฝาปิดถังที่ห่างจากแอ่งถัง (34, 44) DC60 (14/08/40) The purpose of this invention was to have a flapper bucket with a bucket lid and a clamping ring. The lid was provided with a circular groove along the contour of the flattened flap. Of it and its outer edge While it also consists of at least one puddle on its periphery, with or without a hole when the tank is released. The area surrounding the puddle is easily broken, that is, the lid of the pail often comes off the gripping ring. With a leak as a result To improve the leak tolerance of the lid with the bucket closed. Especially suitable tanks and It is allowed to use with dangerous liquids. In conditions of extremely high stress load The area surrounding the basins Of the tank cover, it must be stress relieved in case of over height This is accomplished by making and assembling between the inlet tank basins (34, 44) and the top edge of the outer U-shaped edge. (20) of the tank cover (14) that is prepared Where appropriate, where the radial overhang When measured from the center of the lid to the top edge of the U-shaped edge (20) of the area or this part of the bucket lid, which is long relative to the area or adjacent part of Lid of the tank away from the basins (34, 44) The purpose of this invention is that the tank has a cover with a lid and a clamping ring. The cover is provided with a circular groove along the perimeter. On its flat cover and its outer edge While still consisting of at least one basin On its periphery, with or without holes of the tank, when the tank is released to fall The area surrounding the basins is easily broken, that is, the lid of the pail often comes off the clamping ring. Caught with a leak as a result To improve the leakage fastness of Lid with a closed bucket Especially suitable tanks and Hazardous liquids are permitted in conditions subject to higher stress loads. The area surrounding the basins Of the tank cover, it must be stress relieved In case of over height (The tank was let down) This would be achieved by Made and assembled between the inlet tank basins (34, 44) and the top edge of the upside-down U-shaped edge (20) of the tank cover (14) provided at Appropriate where the radial path protrusion when measured from the center of the bezel to the top edge of the U-shaped (20) edge of this area or part of the cap. A tank which is long in relation to an area or adjacent part Of the lid of the tank away from the basins (34, 44)