Editorial In Focus: Microbial Fuel Cells, some considerations

Biosensors and …, 2009

Function of microbial fuel cell (MFC) as bio-electrochemical treatment system in concurrence with power generation was evaluated with composite chemical wastewater at high loading conditions (18.6 g COD/l; 56.8 g TDS/l). Two dual chambered MFCs [non-catalyzed graphite electrodes; mediatorless anode] were studied separately with aerated and potassium ferricyanide catholytes under similar anodic operating conditions [mixed consortia; pH 6]. Marked improvement in power output was observed at applied higher substrate loading rate for extended period of time without any process inhibition. Catholyte nature showed significant influence on power generation [ferricyanide-651 mV; 18.22 mA; 6230 mW/kg COD R (500 ); 2321.69 mA/m 2 (100 ); 11.80 mW/m 3 and aerated-578 mV; 10.23 mA; 2450 mW/kg COD R (400 ); 1220.68 mA/m 2 (100 ); 5.64 mW/m 3 ] but not on wastewater treatment efficiency. Along with enhanced substrate degradation, relatively good removal of color (31%) and TDS (51%) was also observed during MFC operation, which might be attributed to the diverse bio-electrochemical processes triggered due to substrate metabolism and subsequent in situ bio-potential (voltage) generation. Apart from power generation, various unit operations pertaining to wastewater treatment viz., biological (anaerobic) process, electrochemical decomposition and electrochemical oxidation were found to occur symbiotically in the anode chamber. Among them anaerobic metabolism is considered to be a crucial and important rate limiting step. In view of inherent advantages, function of MFC as integrated bio-electrochemical treatment system in the direction of various wastewater treatment operations can be exploited.

Biofuels, 2018

A microbial fuel cell (MFC) is an advance device to contend with three-dimensional problems of fossil fuel-based energy production with high-cost and pollution-generating units. It is an emerging technology of wastewater treatment with energy production. It has the potential to utilize wastewater as feed substrate for microorganisms and to generate bio-electricity. MFCs can also applied in carbon capture, bioremediation, biosensing, bio-hydrogen production and desalination. In this review, the major focus is on treatment of wastewater integrated with bioelectricity production by MFC. Information about various designs of MFC, electrode materials, important process parameters (pH, temperature, etc.) and the most recent integrated technology of MFC with natural water bodies (hybrid MFCs) is also reviewed. This technology holds promise for a clean and green environment, and its successful applications provide a new outlook for engineers and scientists.

World Academy of Science, Engineering and Technology, International Journal of Biological, Biomolecular, Agricultural, Food and Biotechnological Engineering, 2017

This research is an experimental research which was done about microbial fuel cells in order to study them for electricity generating and wastewater treatment. These days, it is very important to find new, clean and sustainable ways for energy supplying. Because of this reason there are many researchers around the world who are studying about new and sustainable energies. There are different ways to produce these kind of energies like: solar cells, wind turbines, geothermal energy, fuel cells and many other ways. Fuel cells have different types one of these types is microbial fuel cell. In this research, an MFC was built in order to study how it can be used for electricity generating and wastewater treatment. The microbial fuel cell which was used in this research is a reactor that has two tanks with a catalyst solution. The chemical reaction in microbial fuel cells is a redox reaction. The microbial fuel cell in this research is a two chamber MFC. Anode chamber is an anaerobic one (ABR reactor) and the other chamber is a cathode chamber. Anode chamber consists of stabilized sludge which is the source of microorganisms that do redox reaction. The main microorganisms here are: Propionibacterium and Clostridium. The electrodes of anode chamber are graphite pages. Cathode chamber consists of graphite page electrodes and catalysts like: O2, KMnO4 and C6N6FeK4. The membrane which separates the chambers is Nafion117. The reason of choosing this membrane is explained in the complete paper. The main goal of this research is to generate electricity and treating wastewater. It was found that when you use electron receptor compounds like: O2, MnO4, C6N6FeK4 the velocity of electron receiving speeds up and in a less time more current will be achieved. It was found that the best compounds for this purpose are compounds which have iron in their chemical formula. It is also important to pay attention to the amount of nutrients which enters to bacteria chamber. By adding extra nutrients in some cases the result will be reverse. By using ABR the amount of chemical oxidation demand reduces per day till it arrives to a stable amount.

Catalysts, 2020

A wide variety of pollutants are discharged into water bodies like lakes, rivers, canal, etc. due to the growing world population, industrial development, depletion of water resources, improper disposal of agricultural and native wastes. Water pollution is becoming a severe problem for the whole world from small villages to big cities. The toxic metals and organic dyes pollutants are considered as significant contaminants that cause severe hazards to human beings and aquatic life. The microbial fuel cell (MFC) is the most promising, eco-friendly, and emerging technique. In this technique, microorganisms play an important role in bioremediation of water pollutants simultaneously generating an electric current. In this review, a new approach based on microbial fuel cells for bioremediation of organic dyes and toxic metals has been summarized. This technique offers an alternative with great potential in the field of wastewater treatment. Finally, their applications are discussed to exp...

2020

In the present work the electrochemical behaviour of microbial cells from a biocathode microbial fuel cell (MFC) functioning with wastewater was evaluated by cyclic voltammetry. In-situ electrochemical assays were performed and, under the tested experimental conditions, the biocathode medium was found to be the most e cient for the cathodic catalysed electrochemical reduction of oxygen. Different controls using sterile media and membranes covering the electrodes were performed and compared with the regular biocathode results. In the biocathode chamber, the presence of bacteria was associated with the enhanced active redox processes and with the higher electrochemical reduction of oxygen activity. The present study is a contribution to the understanding of the viability and advantages of the biocathodes use in MFC.

Applied Biochemistry and Biotechnology, 2010

This objective of this study is to conduct a systematic investigation of the effects of configurations, electrolyte solutions, and electrode materials on the performance of microbial fuel cells (MFC). A comparison of voltage generation, power density, and acclimation period of electrogenic bacteria was performed for a variety of MFCs. In terms of MFC configuration, membrane-less two-chamber MFCs (ML-2CMFC) had lower internal resistance, shorter acclimation period, and higher voltage generation than the conventional two-chamber MFCs (2CMFC). In terms of anode solutions (as electron donors), the two-chamber MFCs fed with anaerobic treated wastewater (AF-2CMFCs) had the power density 19 times as the two-chamber MFCs fed with acetate (NO3−2CMFCs). In terms of cathode solutions (as electron acceptors), AF-2CMFCs with ferricyanide had higher voltage generation than that of ML-2CMFCs with nitrate (NO3−ML-2CMFCs). In terms of electrode materials, ML-2CMFCs with granular-activated carbon as the electrode (GAC-ML-2CMFCs) had a power density 2.5 times as ML-2CMFCs with carbon cloth as the electrode. GAC-ML-2CMFCs had the highest columbic efficiency and power output among all the MFCs tested, indicating that the high surface area of GAC facilitate the biofilm formation, accelerate the degradation of organic substrates, and improve power generation.

Applied Sciences, 2021

Nowadays, the world is experiencing an energy crisis due to extensive globalization and industrialization. Most of the sources of renewable energy are getting depleted, and thus, there is an urge to locate alternative routes to produce energy efficiently. Microbial fuel cell (MFC) is a favorable technology that utilizes electroactive microorganisms acting as a biocatalyst at the anode compartment converting organic matter present in sewage water for bioelectricity production and simultaneously treating wastewater. However, there are certain limitations with a typical stand-alone MFC for efficient energy recovery and its practical implementation, including low power output and high cost associated with treatment. There are various modifications carried out on MFC for eliminating the limitations of a stand-alone MFC. Examples of such modification include integration of microbial fuel cell with capacitive deionization technology, forward osmosis technology, anaerobic digester, and cons...

Scientific reports, 2016

This study presents a simple and sustainable Microbial Fuel Cell as a standalone, self-powered reactor for in situ wastewater electrolysis, recovering nitrogen from wastewater. A process is proposed whereby the MFC electrical performance drives the electrolysis of wastewater towards the self-generation of catholyte within the same reactor. The MFCs were designed to harvest the generated catholyte in the internal chamber, which showed that liquid production rates are largely proportional to electrical current generation. The catholyte demonstrated bactericidal properties, compared to the control (open-circuit) diffusate, and reduced observable biofilm formation on the cathode electrode. Killing effects were confirmed using bacterial kill curves constructed by exposing a bioluminescent Escherichia coli target, as a surrogate coliform, to catholyte where a rapid kill rate was observed. Therefore, MFCs could serve as a water recovery system, a disinfectant/cleaner generator that limits ...

Vandana Publications, 2020

Bioelectricity is the electric current produced by anaerobic ingestion of organic substrate by microorganism. A microbial fuel cell (MFC) is a appliance that transforms energy discharged outcome of oxidation of complicated natural carbon sources that area unit used as substrates by microorganisms to provide voltage thus demonstrating to be associate proficient ways that of viable energy production. The electrons released because of the microbial breakdown is seized to keep up ruthless potential density while not an efficient carbon discharge within system. Usage of microorganisms toward bioremediation is similar to the consequence as of the generation of electricity creates the MFC technology a very beneficial plan which could be smeared in varied segment of industries and agricultural wastes. Although the influences of MFCs in generation of electricity was initially low, modern development within the style elements and dealing has increased ability yield to a major step thus permit application of MFCs in varied sectors as well as waste material ministrations and biodepollution. The accompanying review gives a top-level view concerning the parts, operating, alteration and purpose of MFC technology for numerous analysis and industrial application.