portentah7: enable BLE

pennam · pennam · commit f72f88ec4ffb · 2025-08-21T11:05:32.000+02:00
Add configs to enable BLE on Portenta H7

Signed-off-by: pennam &lt;m.pennasilico@arduino.cc&gt;
diff --git a/boards.txt b/boards.txt
@@ -239,7 +239,7 @@ portentah7.menu.debug.true.build.zsk_args.debug=-debug
 
 portentah7.build.zephyr_target=arduino_portenta_h7@1.0.0//m7
 portentah7.build.zephyr_args=
-portentah7.build.zephyr_hals=hal_stm32
+portentah7.build.zephyr_hals=hal_stm32 hal_infineon
 portentah7.build.variant=arduino_portenta_h7_stm32h747xx_m7
 portentah7.build.mcu=cortex-m7
 portentah7.build.fpu=-mfpu=fpv5-d16
diff --git a/variants/arduino_portenta_h7_stm32h747xx_m7/arduino_portenta_h7_stm32h747xx_m7.conf b/variants/arduino_portenta_h7_stm32h747xx_m7/arduino_portenta_h7_stm32h747xx_m7.conf
@@ -95,4 +95,22 @@ CONFIG_VIDEO_BUFFER_POOL_ALIGN=32
 CONFIG_VIDEO_BUFFER_USE_SHARED_MULTI_HEAP=y
 CONFIG_VIDEO_BUFFER_SMH_ATTRIBUTE=2
 CONFIG_FLASH=y
-CONFIG_STM32H7_BOOT_M4_AT_INIT=n 
+
+
+CONFIG_BT=y
+CONFIG_BT_HCI_RAW=y
+CONFIG_BT_HCI_RAW_H4=y
+CONFIG_BT_HCI_RAW_H4_ENABLE=y
+CONFIG_BT_BUF_ACL_RX_SIZE=255
+CONFIG_BT_BUF_CMD_TX_SIZE=255
+CONFIG_BT_BUF_EVT_DISCARDABLE_SIZE=255
+CONFIG_BT_MAX_CONN=4
+CONFIG_BT_CTLR_ADV_EXT=y
+CONFIG_BT_CTLR_ADV_PERIODIC=y
+CONFIG_BT_CTLR_DTM_HCI=y
+CONFIG_CYW4343W_MURATA_1DX=y
+CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048
+CONFIG_BT_RX_STACK_SIZE=4096
+CONFIG_BT_HCI_TX_STACK_SIZE=4096
+
+CONFIG_STM32H7_BOOT_M4_AT_INIT=n
